PENTENS 607 Acrylic Cure Sealant
────── Taiwan Green Material Label Product
PENTENS 607 is a white acrylic based carck filler in paste form for application from a cartridge.
- Easy to apply and finish
- Excellent adhesion to most building materials
- Fast setting
- Flexible seal
- Non staining
- Can be over paint or papered
- Wall/ceiling angles, cornices
- Door and window frame surrounds
- Fitted furniture
- Replacement window installations
Surfaces shall be clean, dry and free from grease. PENTENS 607 adheres to most materials common in the building industry including concrete, brickwork, plaster, wood, plastics and glazed tiles. No priming is required.
Cut conical tip off cartridge end thread. Screw on nozzle, cut at 45° to required size and fit into a sealant gun.
Extrude sealant directly into joint ensuring complete contact with joint faces.
Tool the sealant off within 15 minutes of application using a scraper or tooling stick dipped in clean plain water. Where a particularly neat finish is required use masking tape along the joint faces. Remove immediately after tooling.
Painting and Wallpapering
607 sets quickly after application and can be painted or wallpapered over approximately 1 to 8 hours, depending on size of crack and quantity of material used. Synthetic emulsion paints may be used.
Tools and equipment just can be clean with thinner immediately after use.
Impervious gloves and barrier cream should be used when handling these products.
Eye protection should be worn. In case of contact with eyes, wash thoroughly with plenty of water and seek medical advice if symptoms persist.
If contact with skin occurs, it must be removed before curing takes place.
Wash off with an industrial skin clearer followed by plenty of soap and water. Do not use solvent.
Ensure adequate ventilation when using these products.