PENTENS 603 Acetic Cure Silicone Sealant
PENTENS 603 is one part acetoxy cure, widely used for glazing and sealing and weatherproofing in all building, modular house, freight container, roofing and cladding joint. Excellent adhesion to glass, aluminum, ceramic. Painted surface, most metals, most plastics.
- High durability
- Excellent resistant to chemicals
- Easy application
- Excellent weathering
- Non staining
- Excellent acoustic ratings
Interior or Exterior:
- Floor and wall cracks
- bath tubs
- Stop leakage
- Rubber and more
Clean and dry surface. Remove any stains and impurities.
Cut cartridge tip, screw on nozzle, and cut nozzle to desired opening at 45° angle.
Apply sealant with caulk gun.
Tooling must be completed in 5 minutes.
Remove excess silicone with dry paper towel.
Normally sealant skins in 5 minutes, dries to touch in 1 hour, and cure and bones in 24 hours.
Impervious gloves and barrier cream should be used when handling these products.
Eye protection should be worn. In case of contact with eyes, wash thoroughly with plenty of water and seek medical advice if symptoms persist.
If contact with skin occurs, it must be removed before curing takes place.
Wash off with an industrial skin clearer followed by plenty of soap and water. Do not use solvent.
Ensure adequate ventilation when using these products.