PU-130 Polyurethane Spray Foam Insulation System
PENTENS PU-130 is a two component, 1:1 ratio, closed-cell polyurethane foam insulation system which when processed through suitable spray machinery (Grace etc.) will produce a solid foam with exceptionally good compressive strength. The foam surrounds the structure in a lightweight blanket of insulation that creates a controlled comfort zone inside or outside the structure and contributes to its overall structural integrity.
- Excellent on heat insulation
- Can be trimmed, sanded and, sawn, if necessary, painted and plastered
- Can be applied to damp surfaces
- Good adhesion to most construction surfaces, such as wood, brick, concrete, metals and many plastics
PENTENS PU-130 is used for thermal and acoustic insulation in:
- Exterior or interior of agricultural buildings
- Ocean going yachts/canal barges
- Internal industrial roofing
- Domestic slate or tiled roofs
PENTENS PU-130 is also suitable used as a protective layer for waterproofing before backfilling soil at basement wall or pouring concrete at roof deck.
Standard PENTENS PU-130 should not be used on substrates below 0°C. When used externally, the foam must be protected from ultra-violet radiation and atmospheric degradation by a suitable elastomeric coating.
|
Appearance |
Liquid |
|
Main Form |
Calcium carbonate, Acrylic resin |
|
Application Temperature |
5°C～40°C |
| Packaging |
PU-130-A: 18 KG/PAIL, 215 KG/DRUM PU-130-B: 21 KG/PAIL, 250 KG/DRUM |
| Shelf life |
12 months whenunopened and undamaged |
