PENTENS T-250AC ART COATING

PENTENS T-250 Art Coat is a special technology with use multi-color paint to imitation marble or granite. Improve the workability of colorful paint. Provide designers and developers with different choice in the walls and floor of expression.

ADVANTAGES

  • Low VOC
  • Superb adhesive strength
  • Easy application
  • Suitable in hot and humid climate
  • Environmentally friendly
  • Easy to clean and protect
  • Multiple color choice

USES

PENTENS T-250 Art Coat with multi-color, high
tolerance, not easily crack and other
advantages, suitable for the following places as
a protective layer:
- Marble-like design/Decorative floor
- Polished Porcelain tile design floor
- Food/Hygienic Industrials
- Electric/Clean room design
- Car park/Traffic Zones design
- Assembling plants/Storage and logistic areas
- Chemical and pharmaceutical industries
- Institutional areas

PHYSICAL DATA

APPLICATION

Application
All the surface must be clean, free from grease, oil, laitance and remove all the dirt and contaminants.
PENTENS T-007 coating (leave to cure for 24hr)
PENTENS T-303N coating (leave to cure for 24hr)
Spray PENTENS T-250 (leave to cure for 24hr)
Spray PENTENS T-250AC (leave to cure for 24hr)

Method statement
Re-stir the mixture before use. Adjust the mixture with small amount of clean water if necessary.
Install with special design spray equipment. 
Compressor need to use more than 5.5 kw, pump pressure need to use more than 0.6MPa. 
Spray gun diameter about 2.5 mm, Adjust the spray gun perpendicular to the base. Spray with uniform speed.
Pay attention and spray carefully to avoid the accumulation of material when encounter walls or any obstacles.

SAFETY

Impervious gloves and barrier cream should be used when handling these products.
Eye protection should be worn. In case of contact with eyes, wash thoroughly with plenty of water and seek medical advice if symptoms persist.
If contact with skin occurs, it must be removed before curing takes place.
Wash off with an industrial skin clearer followed by plenty of soap and water. Do not use solvent.
Ensure adequate ventilation when using these products.​