PENTENS T-250 Colorful Wear-resistant Surface Coating

PENTENS T-250 Specially formulated mineral based coating system of inorganic nature for both exterior and interior use.

ADVANTAGES

  • Wear-resistance
  • Heat resistance-thick application
  • Vapor barrier
  • Resistance to pollution attack-ideal for industrial and coastal areas
  • Good mechanical and chemical stability 
  • Air and UV protection
  • Non-toxic 
  • Prevention of ravages of acid rain, freeze-thaw, cycles, sunlight, bacteria and fungus.

USES

  • Indoor and outdoor ball court for tennis, basketball, badminton, handball, volleyball, squash, skate, in-line skate…etc.
  • Dust-proof and wear-resistance floor of warehouse, parking yard 
  • Metal roof for reducing heat
  • Protective coating for waterproofing materials

PHYSICAL DATA

APPLICATION

Surface Preparation
All surfaces must be sound, clean and grease, oil, curing compound and any foreign materials which will inhibit proper bond. For old surface, ensure that loose and flaking materials are removed with a stiff bristle brush. Cracks and damaged area should be required and allowed to dry and harden prior to application of PENTENS T-250.

Application
Dilute 1 portion of PENTENS T-007 with 3 portion of clean water permeable primer or 1 portion of PENTENS T-250 with 3 portion of clean water and then plaster directly to the surface to be waterproofed, in order to improved the bonding.
PENTENS T-250 is suggested to apply 2 coats. 

Apply the first coat of PENTENS T-250 on the application surface. Leave to cure for approximately 8 hours before applying second coat. PENTENS T-250 can be installed with
conventional airless spray equipment, brush or roller.

SAFETY

Impervious gloves and barrier cream should be used when handling these products.
Eye protection should be worn. In case of contact with eyes, wash thoroughly with plenty of water and seek medical advice if symptoms persist.
If contact with skin occurs, it must be removed before curing takes place.
Wash off with an industrial skin clearer followed by plenty of soap and water. Do not use solvent.
Ensure adequate ventilation when using these products.​