PENTENS T-202 Ceramic Coating

────── Taiwan Green Material Label Product  

────── HKGBC Eco-Product  

PENTENS T-202 is a single component, water-based, ready mixed, PU-acrylic based, coarse textured decorative and protective coating finish over prepared concrete, masonry and steel structures.


  • Excellent adhesion and durability
  • Excellent weather resistance
  • High reflection effect
  • Good flexibility
  • Freeze-thaw resistant
  • Vapor permeable
  • Water resistant
  • Easy to apply


  • As a decorative and protective finish coat of concrete, masonry, cement plaster, stucco and PENTENS Thermal Insulation System
  • Exterior and interior applications
  • External wall, roof, floor



Surface Preparation
All the substrate surfaces must be clean, free from grease, oil, laitance, and remove all the dirt and contaminants, which might affect adhesion.

Re-stir the mixture before use.
Adjust mix if necessary by adding a small amount of clean water to achieve the desire textured finish.

PENTENS T-202 is meant to be applied as a two-coat system. PENTENS T-202 can be installed with conventional airless spray equipment, brush or roller. Back rolling after spray application is strongly recommended to achieve uniform texture and film thickness.

On concrete roofs: 1~1.5 kg/m²/per coat
On facade/vertical: 0.5~1 kg/m²/per coat


Impervious gloves and barrier cream should be used when handling these products.
Eye protection should be worn. In case of contact with eyes, wash thoroughly with plenty of water and seek medical advice if symptoms persist.
If contact with skin occurs, it must be removed before curing takes place.
Wash off with an industrial skin clearer followed by plenty of soap and water. Do not use solvent.
Ensure adequate ventilation when using these products.