PENTENS E-500SE Self-emulsified, Solvent-soluble, Hydrophilic Epoxy Resin

PENTENS E-500SE An unique state-of-the-art twocomponent, ambient cure, self-emulsified Hydrophilic yet organic solvent-soluble epoxy resin.


ADVANTAGES

  • Long pot life with fast initial cure for early rain resistance 
  • Corrosion resistance
  • Humidity resistance
  • Excellent dry and wet adhesion
  • Ideal for use in concrete cracks coincide with leaks injection repair works
  • Odorless

USES

  • PENTENS E-500SE is recommended for use in industrial, construction, and transportation.
  • PENTENS E-500SE is also ideal for use in application of concrete cracks injection repair coincide with leaks

PHYSICAL DATA

APPLICATION 

Surface Preparation
The substrate must be clean and free from all lose particles, dust, cement laitance, oil and other contaminants.

Mixing
PENTENS E-500SE consists of a base and a hardener component. They are carefully mixed by means of a slowly rotating electric drill with paddle. The correct mixing ratio and for ecological reasons. Packs should be emptied thoroughly.

Application
Application of PENTENS E-500FLEX is normally by means of rubber squeegees, roller or brush.
Allow to dry 12 hours or until tack free at 23°C surface temperature. Material cures slower at lower temperatures.

SAFETY

Impervious gloves and barrier cream should be used when handling these products.
Eye protection should be worn. In case of contact with eyes, wash thoroughly with plenty of water and seek medical advice if symptoms persist.
If contact with skin occurs, it must be removed before curing takes place.
Wash off with an industrial skin clearer followed by plenty of soap and water. Do not use solvent.
Ensure adequate ventilation when using these products.