Pentens® Waterproofing

Pentens® T-100, Water-Based PU Bituminous waterproofing membrane
PENTENS T-100 is a specially produced PU bituminous waterproofing compound for use on both internal and external surfaces. It will bond perfectly to almost any surface such as concrete, masonry, metal and timber. It may be applied to new or existing structures, and will bond to a damp surface. It can also be mixed with sand,...more
Pentens® T-200, UV Resistant Elastomeric Waterproofing Coating
PENTENS T-200 is a newly developed Acrylic polymer waterproofing coating offering a hardness and durability. It resists ageing from heat, sunlight and ozone. It has excellent gas impermeability and toughness, and remains flexible at low temperatures. It is a warranted roofing and tanking product.
Pentens® T-200H, UV Resistant Elastomeric Waterproofing Coating
PENTENS T-200H is based on a newly developed Water based Polyurethane and Acrylic Polymers. It is dramatically reduces solar heat absorption in either air-conditioned or non-air conditioned buildings. It takes the majority of the heat load off a building’s skin and reduces temperatures to approximately that of outside shade.
Pentens® T-201, Acrylic Waterproofing Emulsion
PENTENS T-201, is a high quality one-component elastomeric waterproofing coating, in an acrylic emulsion base, intended for the protection and decoration of above ground concrete and masonry surfaces. It is also finishing for all types of roofs and facades.
Pentens® T-300, Flexible Cementitious Waterproofing
PENTENS T-300 is highly flexible, thixotropic two pack material consisting of high solids polymer with modified cement bound mineral powder. PENTENS T-300 is free from chlorides and any other corrosive substances.
Pentens® T-304, High Elastic Cementitious Waterproofing
PENTENS T-304 is high elastic, thixotropic two pack material consisting of high solids polymer with modified cement bound mineral powder. PENTENS T-304 is free from chlorides and any other corrosive substances.
Pentens® T-305, Cementitious Waterproofing Coating
PENTENS T-305 is cement based waterproofing coating incorporates 2 polymer components. Apply directly to concrete and mortar to prevent water infiltration.
Pentens® T-305TH, Cementitious Waterproofing Coating
PENTENS T-305TH is a cement based waterproofing coating incorporates 2 polymer components.
Pentens® T-308, Crystalline Admixture Waterproofing
Pentens T-308 is added to batches of concrete during the mixing process for new construction projects. The high-growth organic component of the product reacts with water and unhydrated particles in concrete to form millions of needle-like crystals. These crystals grow and migrate through the concrete to fill in hair-thin...more
Pentens® T-308FLEX, Self-Healing Crystalline Waterproofing
PENTENS T-308Flex Self-Healing Crystalline Waterproofing is an engineered silane coated nanoparticles crystalline waterproofing that derived from nanocapsule core-shell technology which is a two-phase waterproofing system
Pentens® T-308M, Crystalline Cementitious Waterproofing Compoun
A reactive crystalline type waterproofing material which creates long chained complexes a non-soluble crystalline to seal concrete pores and capillary tracks.
Pentens® L-210, Synthetic Rubber Based, Waterproof Thermal Insulation Coating
A state-of-the-art 5-in-1 multifunctional synthetic rubber based waterproofing product. The use of ultra high pressure water jet cutting process treated recycled rubber granules to replace the greater part of conventional fillers and aggregates in product formulation, up to 40% of the total product weight, makes PENTENS L-210...more
Pentens® SPU-1000, Pure Polyurea Waterproofing Spray Coating
PENTENS SPU 1000 is a solvent free, two-component pure polyurea spray coating. The seamless coating provides an elastic yet tear resistant surface for applications subjected to extreme wear and tear, strong impact and chemical exposure. Except for some yellowing effect, the coating is suitable for outdoor applications.